Santi Heating System Battery

Santi 24 Ah 

This battery pack is manufactured with hi-tech rechargeable Li-Ion cells which offer high discharge current. As result, it may be used to supply power to equipment items which require 200W in total. On the top section of the canister there are an E/O cord connector, piezo switch, overpressure valve. There is also a belt loop (no need for clamps) on the side of the housing.

One touch is enough to turn battery on, which is indicated by built-in blue LED on the E/O cord connector. After each switch-on power status is presented. Number of flashes emitted by blue LED informs about the charge level.
3 flashes of LED stand for 60%-100%
2 flashes of LED stand for 30-60%
1 flash of LED stands for < 30%
no light emitted by LED – fully discharged
after power level check battery resumes standard mode, what is indicated by constant LED light.
Operating time (heating) when heated equipment in use:
heated undersuit (110W): about 2h30min / 3h
heated vest (55W): about 5h / 6h
heated gloves (36W): about 9h / 10h
undersuit + gloves (146W): about 2h / 2h15min
vest + gloves (91W): about 3h15min / 3h45mi

Technical parameters:
capacity: 24 Ah
operating voltage: 11,1 V
cells type: Li-Ion
height: 270 mm
diameter: 74 mm
E / O cord length: 35cm
housing material: polyacetal / POM / Delrin®
charging time: ~14h
max depth: 100m
weight: 1,8kg
Charger parameters:
supply voltage range: 100-265V AC 50-60Hz
input current: 1,8A
output voltage: 12,6VDC
output current: 3A
USB output: 5VDC 1A
output power: 90W
dimensions: 132mm x 58mm x 30mm
weight: 365g